Septic Tank Pumping – How To Determine The Frequency


Septic Tank Pumping Frequency Determination

Septic Systems have been installed within about six in ten homes of the United States.  Especially in the great Northwest territory of Washington State and especially in King County Wa, where septic systems are abundant. They are a clean and cost efficient way to manage household sewage water. Properly cared for septic tank systems will for sure provide a home several years of breakdown free management of household gray water. The most significant part of maintaining your system is routine septic tank pumping and septic system inspection by a certified King County septic system service.

Getting the septic tank inspected by a experienced King County septic tank pumping service on a regular basis will help you decide when septic tank pumping is required. Many septic tank systems need to be inspected about once every 3 years. Certain septic tank systems with mechanical components will need to be inspected more often. The septic tank system’s records will have a proposal about the frequency of septic tank pumping and septic system inspection.

Septic Tank Pumping – Many homeowners desire to know how often they should have their septic tank pumping done depending on how many individuals live in the residence. A variety of conditions influence when a septic tank pumping is needed, so there is no exact answer for everyone. There are, however, ways to estimate when a septic tank will need pumping and things you can do to lengthen the time before septic tank pumping is required.  It is smart to not take a risk with the Septic tank system and have the septic tank pumping done each and every 3 years as recommended by the King County Health Department.

There are specific ways that your certified King County Septic Tank Pumping Contractor can establish the needed septic tank pumping frequency for your actual family and septic tank system.  In order to have the septic tank pumping professional estimate how often your household should have the septic tank pumping performed, you will need to have the septic tank pumped, at that time the septic system service professional will make that determination. As an example: an average 4 bedroom house will have (in King County WA) a 1000 to 1500 gallon septic tank and with a family of 4 should expect to have the septic tank pumped out, every 3 to 5 years of standard use.

The main determining factors for septic tank pumping schedule is, the scum (top) and sludge (bottom) layers of the septic tank. A technician will check the layers during the septic tank inspection. Septic Tank Pumping

Both of the layers are extremely dependent of how the septic tank system is used and what is being put down the household drains. An additional factor is the size of the septic tank in relation to the size of the family using the septic tank system. A septic tank system that is too small for the house will need to be pumped out more frequently. This situation is usually more prevalent in older homes built earlier than 1980.  After about 1980 the size of the residence being built on the property is considered when a new septic tank system is installed.

The main two things which effect the schedule of septic tank pumping is the number of individuals living in the house and how the system is used. Of course, the more individuals using the septic system and drainfield means more waste water will be created. This is not something you can do anything about, other than it is significant to keep in mind when considering how often to schedule septic tank pumping and inspection of the septic tank system.

Use of the septic tank system is the one factor that homeowners can keep an eye on and adjust to help expand the schedule between septic tank pumping. Managing the amount of water being used in the household and what is being put down the toilet, dishwasher, washing machine or sink and if a garbage disposal is being installed is truly important.

Water – Using high efficiency or water saving plumbing fixtures, such as toilets and faucets, can to a great extent decrease the amount of water that goes into the septic system. Fixing leaks and drips is an added way to decrease the overuse of water that can cause the septic tank to fill up earlier.

Waste – Managing the solid waste that flows into the septic tank system is an added technique to keep the septic tank system continues operating properly. Things which should by no means go into the septic tank that are either washed or flushed down the drains could overburden the septic tank system. Do not use a garbage disposal with a septic tank system and do not flush anything except toilet paper.

Find more information about Septic Tank Pumping frequency at our Septic Tank Pumping page.

Leave a Reply